Print Page | Close Window

New update?

Printed From: ATCPro Forums
Category: ATC Pro Forums
Forum Name: General Discussion
Forum Description: ATC Pro Discussion
URL: http://atcpro.flight1.net/forums/forum_posts.asp?TID=723
Printed Date: 23 Jul 2019 at 3:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: New update?
Posted By: nikita787
Subject: New update?
Date Posted: 11 Feb 2019 at 9:40pm
It has literally been years, when is 1.21 coming out?



Replies:
Posted By: atcitizen
Date Posted: 13 Feb 2019 at 7:05pm
There's another thread that has addressed this but there's no timeline. To me it seems to be a lost cause. 


Posted By: SabreN86
Date Posted: 14 Feb 2019 at 3:01pm
Thought we had gotten there a few weeks ago but we were mistaken. Oh well. Confused

-------------
bigbob


Posted By: brodie4598
Date Posted: 18 Feb 2019 at 10:57am
I tried to install ATC pro again last week, resigned to the fact that it’s not going to get fixed and the frustration came back in full force.

Clearing a plane for a visual approach and then seeing it join the localizer in the opposite direction until it gets to Center

Having to say the name of a fix over and over and over DUMMM....FATTT....DADDY... and the planes never understand (yes I followed the pronunciation guide, as well as every accent in my repertoire)

Having Double Eagle call for a departure and never being able to figure out wth they are expecting me to say (yes I was following the voice commands doc).





Posted By: VenturaGuy101
Date Posted: 19 Feb 2019 at 11:07pm
@brodie4598 I think we all can feel your pain.  I know that I had my hopes up when Tom suggested releasing build 21 unfinished but unfortunately this does not look likely at this point.   I am not sure why Tom and Dave decided to hold back the releasing the unfinished build 21 even a beta version.  There were a bunch of positive feedback supporting the release of the unfinished version.  I come from the school of thought where any update that fixes any of the previous bugs and brings enhanced features should be released even though there may be some bugs or even new bugs as long as the release being improvements to the current version.  As long as none of the bugs are "game breaking".  I am guessing that Dave and Tom have their reasons that the current build is not ready for release. Well, we will have to wait until its finished.

Regarding the sign above:  Unfortunately its not the right "Hell" that froze over.  Although we have been "to Hell and back" a few times on this forum.

Most importantly:  I hope that software Tom and his family have a better 2019 and that he has a successful recovery.  That is more important than anything on this forum.


Posted By: AlanR
Date Posted: 23 Feb 2019 at 11:12am
Brodie, in regards to the Double Eagle departures, try this, it works for me every time:

For a departure release, say "November one two three, heading four zero, maintain eight thousand, released"

Of course you would substitute whatever call sign, heading and altitude needed.

For an IFR clearance, I say:

"November one two three, cleared from Alexander as filed, maintain eight thousand, departure frequency one two three point niner, squawk six one two four"

Again substituting your call sign and altitude as appropriate.

I've had the same problems with the fix names at ABQ, but it seems to be just those three that you mentioned.  I always say "dumb emmz" "fat teez" and "dad eee".  Sometimes it works but sometimes not.


-------------
Alan


Posted By: brodie4598
Date Posted: 23 Feb 2019 at 11:33am
Thanks for that Alan - I actually was thinking I had to direct the command to double eagle in the so that was definitely my problem there - thanks!. 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net